There is only one trailer hitch that fits the 1979 Buick Estate Wagon. It is # C12009. But this is a Class II hitch with a 1-1/4 inch receiver rated for 350 pounds tongue weight and 3,500 pounds gross trailer weight. There isn't a higher capacity hitch available for this vehicle. view full answer...
Yes, the Air Lift 1000 kit part # AL60755 that you referenced is a confirmed fit for your 1979 Buick Estate Wagon. Everything about this kit is the proper size and will fit well since it's been tested. view full answer...
You will need a receiver like the Draw-Tite Ultra Universal Trailer Hitch Receiver # 41990-07 for your 1977 Buick Estate Wagon. We currently do not carry a custom fit receiver for your Buick. This universal receiver will allow you to fit a 2" receiver on a frame up to 44" wide. The 7" tall mounting brackets allow you to bolt the receiver on or weld it on. You will need to check your owners manual for any manufacturer limits for towing as I could not find any specifications for towing limits... view full answer...
I attached a picture of what I believe is your best option for a weight distribution shank that has at least 5 inches between the pin hole and the support gusset. The part number for this shank is # EQ90-02-4500. view full answer...
We have a class II hitch that will fit your 96 Buick Roadmaster. The Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" Item # C12009. We haven't had the chance to install this hitch on a vehicle, but it is rated for a 50 minute install and has some drilling required. You can see the installation steps in the instructions I have linked. This Class II hitch is the only option for your vehicle so provided that its 3,500 pound capacity as well as the car's capacity are high enough... view full answer...
Go To Results